Car Stereo Fitting | Car Stereo Removal | Remove Car Stereo Advice | Fit Car Stereo Help
home  |  vehicles list  |  disclaimer  |  contact  |  about
Untitled Document
How to remove a BMW Business Class car stereo


Items you might need before you start work -





Original stereo image




How to do it step by step





Start by removing the VOLUME KNOB off the left hand side of the stereo.
This should reveal a flat blade screw which you need to turn to release some catches holding the stereo in place.
You need to turn the screw and pull with your fingers on the stereo at the same time to get the lower half out.

NOTE: This screw doesn't come all the way out and should only turn 90 degrees each way.

Once the lower half of the stereo is out, there are 2 allen key screws holding the top half in place on each side of the top stereo.

Remove the top radio and disconnect aerial and ISO wiring plugs from back.
Car Stereo Fitting | Car Stereo Removal | Remove Car Stereo Advice | Fit Car Stereo Help
** PLEASE DESCRIBE THIS IMAGE **
** PLEASE DESCRIBE THIS IMAGE **

vehicles in this category Other Vehicles In This Category
document BMW 3-SERIES (E46 MODELS)
document BMW Z3 (MOST MODELS)
document BMW X3 (2004 ONWARDS)
document BMW 1-SERIES (2004 ONWARDS)
document BMW 5 SERIES (2003 to 2009)