Car Stereo Fitting | Car Stereo Removal | Remove Car Stereo Advice | Fit Car Stereo Help
home  |  vehicles list  |  disclaimer  |  contact  |  about
Untitled Document
How to remove a Honda Accord car stereo - (1998 to 2002)


Items you might need before you start work -




 

Original stereo image




How to do it step by step





Remove all of the screws underneath the console (Red circles)
There is a hidden screw located on the right hand side of the dash. To gain access, first carefully prise out the middle switch of the bank of 3 located under the RH airvent (headlamp load leveller) and remove the screw. There are also several clips securing the cover to the dash along its lower length which require a firm pull to release. With all the screws undone, carefully pull the trim away.


This will allow you to access the screws that hold the radio in position. There are two pairs of screws on each side.


Remove the screws, then with the radio out remove the plates that are bolted to the side of the radio.
Disconnect the wiring loom and aerial to release the stereo.



Car Stereo Fitting | Car Stereo Removal | Remove Car Stereo Advice | Fit Car Stereo Help
** PLEASE DESCRIBE THIS IMAGE **
** PLEASE DESCRIBE THIS IMAGE **

vehicles in this category Other Vehicles In This Category
document HONDA CIVIC (2000 to 2004)
document HONDA CIVIC - (OEM PIONEER STEREO)
document HONDA S2000 (MOST MODELS)
document HONDA CRV (2001 to 2004)
document HONDA CIVIC - (2006 ONWARDS)
document HONDA ACCORD (1993 TO 1998)
document HONDA INTEGRA TYPE R (1997 TO 2001)
document HONDA HRV (1999 TO 2005)
document HONDA JAZZ (2002 TO 2009)