How to remove a Honda Intergra Type R car stereo - (Most Models)
Items you might need before you start work -
Original stereo image 
How to do it step by step 
Remove the INTEGRA badge from the middle console near the handbrake, then remove the two screws.
Next remove the ashtray which should allow access to THREE screws. Undo them.
Now, on each side of the centre console in the footwell areas on both side you should be able to see a phillips head screw.
Undo these two screws, one from each footwell side.
You can now remove the tray under the stereo.
Remove two screws, one from each side to allow the lower deck to drop, this should allow access to screws holding the stereo and tray/pocket in place, allowing you to easily remove the stereo.
The stereo is now able to be removed.
Disconnect wiring loom and aerial to release the stereo.
Other Vehicles In This Category
