Car Stereo Fitting | Car Stereo Removal | Remove Car Stereo Advice | Fit Car Stereo Help
home  |  vehicles list  |  disclaimer  |  contact  |  about
Untitled Document
How to remove a Mazda 6 car stereo - (2002 to 2008)


Items you might need before you start work -






Original stereo image




How to do it step by step





Remove the gear know by un-screwing it.


Now lift prise up the cup holders / console behind the gear stick surrounding the handbrake lever. This is on pressure clips.


Remove the trim now around the gear lever - again this is on pressure clips.


You should now have access to 2 screws at the bottom of the centre console. Undo these.


Now drop out the glove box down and out by pulling down and pushing the plastic stopper out of the way on the right hand side.


This gives you access to the 10mm bolt holding the rest of the centre console in.


You can now drop the console forward and out.


This will gain access to the 2 PINK screws on each side of the stereo which will release it.
Disconnect the wiring loom and aerial to release the stereo.



Car Stereo Fitting | Car Stereo Removal | Remove Car Stereo Advice | Fit Car Stereo Help
** PLEASE DESCRIBE THIS IMAGE **
** PLEASE DESCRIBE THIS IMAGE **

vehicles in this category Other Vehicles In This Category
document MAZDA 323 (1998 to 2003)
document MAZDA MX5 (1990 TO 2005)
document MAZDA 323 (1994 TO 1998)
document MAZDA 121 (1996 TO 2000)
document MAZDA 6 (2008 ONWARDS)
document MAZDA MX5 (2005 ONWARDS)