Car Stereo Fitting | Car Stereo Removal | Remove Car Stereo Advice | Fit Car Stereo Help
home  |  vehicles list  |  disclaimer  |  contact  |  about
Untitled Document
How to remove a Ford Fiesta car stereo - (2009 Onwards)


Items you might need before you start work -




 

Original stereo image




How to do it step by step




Start by removing the top trim panel as indicated by the arrows above using the trim removal tool. This is on pressure clips and should just pop off.

Next we found it easier to remove the heating control (white) so you will need an 8mm socket / spanner to remove the 2 nuts and a torx screwdriver to remove the screws (indicated by arrows)

The stereo is now only held in by some very stiff clips on each side of the airvent, once these are undone, the stereo should pull forward and release.
Disconnect stereo loom and aerial.
Created by: Mikee Stewart - Please buy this person a beer by clicking the donate button:



Car Stereo Fitting | Car Stereo Removal | Remove Car Stereo Advice | Fit Car Stereo Help
** PLEASE DESCRIBE THIS IMAGE **
** PLEASE DESCRIBE THIS IMAGE **

vehicles in this category Other Vehicles In This Category
document FORD FIESTA (1995 to 2003)
document FORD GALAXY (MOST MODELS)
document FORD PUMA (MOST MODELS)
document FORD DOUBLE DIN (4000 Model >)
document FORD MONDEO (2003 ONWARDS)
document FORD KA (MOST MODELS)
document FORD MONDEO (1993 to 1996)
document FORD FIESTA TRIPLE DECK (2005 MODELS)
document FORD SINGLE DIN UNITS
document FORD FIESTA (2006 TO 2009)
document FORD FOCUS (2005 ONWARDS)
document FORD MONDEO (2011 ONWARDS)