How to remove a Nissan Almera car stereo - (2000 Onwards)
Items you might need before you start work -
Original stereo image
How to do it step by step
Remove the lower trim panel from the console. This is on clips and should just pull off.
Now remove the upper top dash panel which is also on clips. This will pull towards you and can be stiff sometimes.
Now lift up the air vent to reveal some screws. Undo these screws.
There are four lower screws as well, two on each side. Remove these to release the radio and centre console trim.
Disconnect the wiring loom and aerial to release the stereo.
Other Vehicles In This Category